Garden greenhouse SFGH0105

Size: 450cm(L)*240cm(W)*125cm(H) 
- sliding door and two window for excellent ventilation

- water gutter 
- Aluminum profiles with Superb green powder coated frame
- Zince plated steel (For bottom frame and pegs)
- Polycarbonate 4mm with UV coating & protect film,ultraviolet radiation proof 

  (For windows and walls) 
- Easy to assemble
- Vent, gutter included 
- Ideal for traditional or modern gardens.
- Superb Powdercoated for long life.
- Does not tarnish or fade. 
- Affordability - Value-for-money

Why polycarbonate
-Polycarbonate Greenhouse provides over 90% of light transmission to your plants
-Virtually unbreakable, 200 times stronger than glass 
-Polycarbonate blocks out 99.9% of harmful solar UV,UV protected durable and weather resistant
-Polypropylene package, strong and weather resistant, can be stored outside,
-UV protected twin wall polycarbonate sheet is light, strong, safe and easy to handle

This auction is for Greenhouse only. shelves, flowers etc is no included.

The Frame

1) The aluminium frame is anodised a natural silver colour or powder coated green, a very close match to forest green. This results in a very attractive greenhouse that will never rust.

2) All the bolts and self-tapping screws are stainless steel. Stainless steel bolts are very strong. The tensile strength of stainless steel is around 515Mpa compared to mild steel 260MPa and aluminium 180MPa. There is no rust and they are much stronger than other materials.

3) We use 2.0-3mm thick aluminium gussets in the corners and the apex. Most greenhouses use 1mm thick aluminium for gussets. This means our gussets are THREE times thicker than gussets in other greenhouses. We then use stainless steel bolts to secure the frame to the gussets. This results in a very strong corner assembly. With our green frames the gussets are painted to match the greenhouse and don't stand out like unpainted ones in some other brands.

4) Diagonal braces are in every corner and in the roof. Diagonal bracing makes a huge difference to the stability and strength of the structure. If you look closely at pictures of other greenhouses you will see in many cases the braces are absent.

5) We have braces across the apex and braces between the sidewalls and roof to give a stronger greenhouse. You won't find many greenhouses that have this.

6) Most greenhouses have a horizontal piece of framing running across the back wall (plain gable end) to reduce flexing in the back wall. In the Orion 126 we have two of these tying the vertical studs and the corner extrusions together via the2.0- 3mm thick aluminium gussets and stainless steel bolts. This gives us a stronger back wall and reduced flexing.

7) We have a higher apex and side walls than most other greenhouses. This means you can grow taller plants against the side of the greenhouse and back wall. The taller apex results in a more sloped roof making the horizontal roof braces very effective. A higher greenhouse also increases the volume of air inside resulting in a more stable temperature.

8) We use 4/6mm-twin wall polycarbonate instead of glass. Unparalleled safety and up to 50% better insulation than glass.

Contact: Frank Han

E-mail: frankhan@chinashengfametal.com